Mini Hand Held Wireless Micro Non-powered Assets Tracking GPS Mini Rechargeable GPS Tracker

5.2Installation and debugging process

5.2.1 SIM card installation

Open the top cover of the terminal, insert the prepared SIM card into the SIM card holder, and then confirm that the SIM card button is well placed . Please make sure that the SIM card has the GPRS function available in advance and write down the SIM card number.

5.2.2 Main unit power on

After installing the SIM card, turn the battery switch to the ON position. When the red light starts to flash, indicating that the terminal is powered on.

5.2.3 Parameters setting

TCP/UDP connection mode setting

For example, the client's server IP is: 119.145.40.64, port number: 8881. If it is connected by TCP, use SMS to edit: *88*1119145040064*8881*1#; if it is UDP connection, edit: *88*1119145040064*8881*0#. The terminal will reply: set ok, the setting is successful.

5.3Important Parameter Setting

5.3.1 Upload interval setting

Command format: HC, <T1>, <T2>#

Command description: T1: Start upload interval, the value range is 5-300 seconds, the default is 15 seconds.

T2: Sleep interval, ranging from 300 to 1800 seconds, defaulting to 600 seconds.

For example: HC, 30, 300# Set the data upload time to 30 seconds and the sleep upload time to 300 seconds.

5.3.2 Position mode

Command format: LBS, A#

Command description

A=2 close positioning function; A=1 pure base station positioning mode; A=0 base station positioning, GPS positioning, AGPS; default A=0

Example: LBS, 1# Enter pure base station positioning mode, turn off GPS module

5.3.3Latent mode (optional)

Wired terminals can be set to the latent mode, in this mode, the wake-up time and alarm mode can be set.

Command format: HIDE, A#

Command description: Set the latency mode, A=1 On A=0 off

To set the upload interval in latent mode, it needs to send two commands: one: HIDE, 1# 2: HX, 30#

Command description: In latent mode, the terminal wakes up once every 30 minutes. The first command on behalf of the terminal enable the latency mode, the next command is to set the upload interval, the range is similar to wireless terminals: 10 ~ 43200min).

Set clock mode for the wired terminals while in latent mode:

Command Description: Set a multi-point upload parameter, maximum 4 time points T1...T4, you can set one or more clocks if required, maximum supports 4 clocks.

Example: HIDE, 1# WAKEUP, 0800, 1200, 1600, 2000#;

They are all clock points, and the terminal will wake up at 8:00, 12:00, 16:00, and 20:00, and upload the terminal parameter information.

Note: The latent mode function is optional, two commands need to be sent You need to send two SMS commands separately to set them one by one. Please use them with caution!

Specification

Shenzhen Kingwo IoT Ltd (Hereby referred as “Kingwo”) is a high tech company focus on IoT technology, we develop and sell GPS tracking products based on 4G ,3G and 2G network technology, our products include disposable and rechargeable asset GPS trackers, vehicle GPS trackers which are for basic tracking as well as extended accessories and personal GPS tracker for personal monitor, SOS alert , fall detection, our hardware have been widely used in trailer tracking, RV's tracking, container tracking , vehicle tracking and outdoors workers tracking,it brings security confidence for assets owners, fleet owners and companies which needs improve management efficiency , Kingwo is also very professional in OEM &ODM products, till now Kingwo's products have been exported to more than 80 countries and we have sold around 3 million units both in domestic and overseas market, Kingwo also has our own software platform which is called “iTrack Sense”, it has like live tracking, history trace check, rich reports and other features that can be customized.