Set IP, port and communication type of primary server

Example : IP,119.23.233.52,9881,1#
Set the primary server IP:119.23.233.52,port 9881,communication type:TCP
Example :IP,www.itracksense.com,9881,0#
Set the primary server domain:www.itracksense.com,Port 9881,communication type UDP

Set IP, port and communication type of backup server

Eg : IP2,119.23.233.52,9881,1#
Set the backend server IP:119.23.233.52,port 9881,communication type is TCP
Eg : IP2,www.itracksense.com,9881,0#
Set the backend server domain:www.itracksense.com,port 9881,communication type: UDP
IP2,0,0# Delete backend server parameter

Set the upload interval in real time tracking mode:

T1: upload interval in ignition on status, range,5-300s ,default 120s

T2: Upload interval in ignition off status

,range 5-300 s, default 120 s

T3:Sleep return interval, range 10-1800 s, default 180

For example:

HC,30,90# Set the upload interval as 30s in ignition on and 90s in ignition off

HC,30,90,300# Set the upload interval as 30s, 90 s in ignition off and 300s while in sleep mode

Set upload interval according to distance :

C,distance,Unit:meter , when C=0 means function OFF

Eg:

MINDISTANCE,200# Upload data each 200 meter

MINDISTANCE,0# Turn off this function

Set data upload according to speed difference
V, Speed change value,Unit:km/h, 0 indicates this function off
Eg:

MINSPEEDDELTA,10#

Protocol Switch:

Set Protocol type :

PROTOCOL,1# Kingwo protocol only

PROTOCOL,2,1# JT808 protocol only

PROTOCOL,3,1# GT800 protocol only

PROTOCOL,2,1;3,1# Dual IP, IP 1 is Kingwo Protocol, IP2 is GT800 protocol

PROTOCOL,1;1# Both IP1 and IP2 are Kingwo protocol

PROTOCOL# Query

Default password is 1234, maximum 8 digits

Command : BTPSW,[Old password],[New password]#

For example:

BTPSW,1234,5555# indicates Password changed from 1234 to 5555

Default is none

Command: PASSWORD,[Old password],[New password]#

PASSWORD,1234# set the password as 1234

PASSWORD,1234,5555# Password changed from 1234 to 5555

Set time zone:

unit minutes, default UTC+8:00

For example:

UTC,480# Time zone UTC+8:00

UTC,330# Time zone UTC+5:30

UTC,-480# Time zone UTC-8:00

UTC,-210# Time zone UTC-3:30

Set Vibration sensitivity:

S: Sensitivity 1/2/3/4/5 indicates, highest/high/middle/low/lowest

Eg:

LEVEL,1# Sensivity: Highest

LEVEL# Query

Set vibration alarm:
A=1:Vibration alarm ON A=0:Vibration alarm off Default is off
M: Alarm mode,M=0 Only GPRS,M=1:SMS+GPRS

Eg:

ZD,1,1#, Vibration alarm ON, notification mode: GPRS+SMS

ZD,0# Vibration Alarm Off

ZD#

Set cornering compensation angle:

Default is 15 degree, value range 5-180 degree

Eg:

CORNER,15#

CORNER,0#(Delete cornering upload function)

Set enter sleep mode time while in static status:

Default is 5 minutes

Eg:

XM,5# Sleep after 5 mins without vibration

XM,0# Disable sleep mode function

XM# Query

Set initial mileage:

Unit KM, range 0-999999km

*44*61000#,Initial mileage is :1000Km

Set speeding threshold and duration time
V: Speeding threshold:0-255km/h,0 is disable speeding alarm

T:Duration time, value range >=5 seconds, default is 5 seconds:

Eg:

SPEED,50,5# Speed threshold is 50km/h,duration time: 5 seconds

SPEED# Query

Set ACC detect mode:
v, voltage critical value,unit is :0.1V
v=0,Detect ACC status by ACC signal wire
v=131,Detect ACC status via vibration and voltage, voltage critical value is 13.1V

Eg:

VACC,0# Detect ACC status by ACC signal wire

VACC,131# Detect ACC status via vibration and voltage, voltage critical value is 13.1V

VACC# Query

UPGRADE,IP/domain,port,version#

OTA,IP/domain,port,version#

OTA command:

Eg:

UPGRADE,119.23.233.52,7771,MT02S-4.12#
OTA,www.365qczx.com,7771,MT02S-4.12#
UPGRADE,0# Exit upgrade
UPGRADE# Query upgrade status

Query OTA Status:

eg:192.168.1.1:8000,T;T8G-1.5;Wireless upgrade request succeed ,downloading data now!

Set collision class :
N indicates value range 0,10-3000
Default is 0: Disable the collision alarm

Eg:

COLLISION,1000# collision class is :1000

COLLISION# Query

Set turn over angle :
value range is :0-180
Default is 0: Disable the turn over alarm

Eg:

TURNOVER,90#

TURNOVER# Query

Set driving behavior parameter
A: Sharp turn,value range 0-180,default is 0: disable
V1: hard acceleration ,value range 0-255,default is 0: disable the function
V2:hard deceleration,value range 0-255, default is 0: disable the function
T:Hard deceleration and acceleration time,1-30,default is 4 seconds

Eg:

DRIVING,15,30,50,4#

Direction changes exceeds 15°, indicates the vehicle is in sharp turn status

30km/h Speed increased 30km/h within 4 seconds, indicates vehicle is in hard deceleration status,

50km/h Speed reduced 50km/h, indicates the vehicles in hard deceleration status ,

DRIVING#

Set LBS ON and OFF:

A=1 ON ；A=0 OFF,Default is off
Eg:

LBS,1# LBS ON

LBS,0# LBS OFF

LBS# Query

Set vehicle lock logic :
A=0 Receive lock command, execute immediately

A=1 Receive lock command, if ACC is off, execute immediately, if ACC is on, store this command until ACC off
A=2 Store the command, lock vehicle from ACC Off to On, if the communication is well, lock vehicle, otherwise wait for next turn
For example:LOCKACCOFF,0# means execute the lock command immediately after receiving it

Query device status Eg:

Online: IP1 CMNET,119.23.233.52:6000,T ID: 80222001633,id GPS=A,5;GSM=20 MT02S-4.12.128.10 2019-08-06